Brakes/Levers/Pads

Hayes Pro bleed kits include dual syringes and high quality fittings for precise, repeatable bleeds. D.O.T. Brake Fluid Dual Syringe Pro Bleed Kit - Includes 4oz of high performance Hayes DOT 4 brake fluid - Quick connect fittings and dual syringes for an efficient, precise bleed - Bleed fittings for Hayes DOT 4 brakes - Reusable plastic container with locking lid Venom Mineral Oil Dual Syringe Pro Bleed Kit - Includes 2oz of high performance Hayes Venom mineral oil - Quick connect fittings and dual syringes for an efficient, precise bleed - Bleed fittings for Hayes Venom mineral oil brakes - Reusable plastic container with locking lid

Bleed fittings specifically designed for Hayes hydraulic disc brakes.

For use with 2000+ Hayes 74mm eye-to-eye calipers (adapters/calipers for 22mm mounts are no longer available) - (IS) International Standard 51mm tabs; (QR) Quick Release; (TA) thru-axle - Note: Fox-36/40 (thru-axle), Rock Shox Pike (Maxle), and Psylo (Tullio) axle forks use IS-QR adapters

Caliper Mounting Bolts for Hayes hydraulic disc brake systems.

- T100 Sintered Metallic: long-life, all-condition compound - T106 Semi Metallic: no-bed, shorter-life, quieter compound - Set includes one pair of pads with retention clip

- Hayes service parts for calipers - Rebuild kits include: (2) caliper pistons with square profile seals, transfer port o-ring, and caliper bleeder with cap

Hose fittings for Hayes hydraulic disc brakes available a la carte. Hayes brake compatibility: - HFX-9 - Prime - Sole - El Camino - Radar

The D-Series rotor was developed in conjunction with the new Dominion disc brake, designed to provide consistent and reliable stopping power under all conditions. - Proprietary friction surface, optimized for use with Hayes T106 (Semi-Met) or T100 (Sintered) pads to deliver fast, consistent burnish, predictable friction rate, and consistency across temperature and speed conditions - MRC (Modal Resonance Cancellation): Tuned to cancel resonance and vibration, particularly when paired with Hayes T106 (Semi-Met) and T100 (Sintered) pads - 1.95mm thickness enhances heat dissipation - Includes mounting hardware

- T100 Sintered Metallic: long-life, all-condition compound - T106 Semi Metallic: no-bed, shorter-life, quieter compound - Set includes one pair of pads with retention clip

Replacement Master Cylinder and Lever Assembly for Dominion A4 & A2 Disc Brakes. Black/Bronze

Expanding on our award-winning Dominion A4. Our newest brake, Dominion A2, targets Cross Country and Trail riders. Dominion A2 features a two-piston caliper. Dominion A2 includes all the performance from the Dominion A4, utilizing a compact, two-piston caliper. With the SFL option, the Dominion is the ideal brake option for any rider with smaller hands. Hayes product development team set out to design a brake system specifically designed for a smaller ergonomic profile. Dominion SFL maintains all the power and feel of our proven Dominion A4, and accomplishes this using a specifically designed smaller and narrower brake lever. Dominion SFL can be used in conjunction with either our Dominion A2 two-piston caliper or our Dominion A4 four-piston caliper. With optional lever sizes and two caliper choices, Dominion from Hayes Disc Brake now offers a brake that's ideal for your application. Dominion A2 features the proprietary QuickBite² system for fast and consistent burnish, coupled with our D-Series rotor to manage the heat with less braking noise. Available in SFL (Small Finger Lever)—ergonomically tailored for the smaller hand. Key Features: - Tool-Free Reach Adjustment - Flip-Flop Lever Orientation - King Pin Pad Retention - Crosshair Caliper Alignment - Two-Stroke Dual-port bleed system Specifications: - 303g (100cm hose and mount hardware) - DOT 5.1 Fluid - Tool-Free Reach Adjustment - 2-Stroke Dual Port Bleed System - Sealed Cartridge Bearings Lever Pivot - 100cm Front Hose Length - 180cm Rear Hose Length

Brake Pads for your Dominion A2 come in 2 flavors: Sintered T100 - Sintered metallic friction material provides maximum stopping power in wet and dry conditions. Semi-metallic T106 - Friction material provides enhanced modulation and silent operation.

Rebuild kit for Hayes hydraulic disc brakes. - Include pistons, seals, and other parts necessary for service.

Expanding on our award-winning Dominion A4. Our newest brake, Dominion A2, targets Cross Country and Trail riders. Dominion A2 features a two-piston caliper. Dominion A2 includes all the performance from the Dominion A4, utilizing a compact, two-piston caliper. With the SFL option, the Dominion is the ideal brake option for any rider with smaller hands. Hayes product development team set out to design a brake system specifically designed for a smaller ergonomic profile. Dominion SFL maintains all the power and feel of our proven Dominion A4, and accomplishes this using a specifically designed smaller and narrower brake lever. Dominion SFL can be used in conjunction with either our Dominion A2 two-piston caliper or our Dominion A4 four-piston caliper. With optional lever sizes and two caliper choices, Dominion from Hayes Disc Brake now offers a brake that's ideal for your application. Dominion A2 features the proprietary QuickBite² system for fast and consistent burnish, coupled with our D-Series rotor to manage the heat with less braking noise. Available in SFL (Small Finger Lever)—ergonomically tailored for the smaller hand. Key Features: - Tool-Free Reach Adjustment - Flip-Flop Lever Orientation - King Pin Pad Retention - Crosshair Caliper Alignment - Two-Stroke Dual-port bleed system Specifications: - 303g (100cm hose and mount hardware) - DOT 5.1 Fluid - Tool-Free Reach Adjustment - 2-Stroke Dual Port Bleed System - Sealed Cartridge Bearings Lever Pivot - 100cm Front Hose Length - 180cm Rear Hose Length

Replacement disc brake calipers for Hayes Dominion hydraulic brake systems.

The good friction. Speed and confidence come with better braking. Refresh or update the best brakes in the world with some new pads! Brake pads for your Dominion A4 come in 2 flavors: Sintered T100 Sintered metallic friction material provides maximum stopping power in wet and dry conditions. Semi-metallic T106 (aka free-range organic) friction material provides enhanced modulation and silent operation. Gluten-Free. Includes 2 pads, retention screw.

Introducing the all-new, Stealth Dominion, our award-winning Hayes Dominion A4 brakes are back – adding even more ways for you to stop! Dominion's master cylinder is factory tuned for the shortest dead stroke possible and a crisp bite point. The Dominion A4 caliper utilizes four pistons in the most structurally rigid design possible. It features a cold-forged caliper and KingPin structural pad retention bolt that increases stiffness. With a motorsports-inspired Two-Stroke dual port bleed system, industry-leading DOT 5.1 fluid and Kevlar hose, the hydraulic system is engineered for ultimate performance across all temperatures and easy maintenance. Dominion A4 features the proprietary QuickBite² system for fast and consistent burnish, coupled with our D-Series rotor to manage the heat with less braking noise. Available in SFL (Small Finger Lever)—ergonomically tailored for the smaller hand. Key Features: - Tool-Free Reach Adjustment - Flip-Flop Lever Orientation - King Pin Pad Retention - Crosshair Caliper Alignment - Two-Stroke Dual-port bleed system Specifications: - 310g (100cm hose and mount hardware) - DOT 5.1 Fluid - Tool-Free Reach Adjustment - 2-Stroke Dual Port Bleed System - Sealed Cartridge Bearings Lever Pivot - 100cm Front Hose Length - 180cm Rear Hose Length

Introducing the all-new, Stealth Dominion, our award-winning Hayes Dominion A4 brakes are back – adding even more ways for you to stop! Dominion's master cylinder is factory tuned for the shortest dead stroke possible and a crisp bite point. The Dominion A4 caliper utilizes four pistons in the most structurally rigid design possible. It features a cold-forged caliper and KingPin structural pad retention bolt that increases stiffness. With a motorsports-inspired Two-Stroke dual port bleed system, industry-leading DOT 5.1 fluid and Kevlar hose, the hydraulic system is engineered for ultimate performance across all temperatures and easy maintenance. Dominion A4 features the proprietary QuickBite² system for fast and consistent burnish, coupled with our D-Series rotor to manage the heat with less braking noise. Available in SFL (Small Finger Lever)—ergonomically tailored for the smaller hand. Key Features: - Tool-Free Reach Adjustment - Flip-Flop Lever Orientation - King Pin Pad Retention - Crosshair Caliper Alignment - Two-Stroke Dual-port bleed system Specifications: - 310g (100cm hose and mount hardware) - DOT 5.1 Fluid - Tool-Free Reach Adjustment - 2-Stroke Dual Port Bleed System - Sealed Cartridge Bearings Lever Pivot - 100cm Front Hose Length - 180cm Rear Hose Length

Peacemaker Brake Lever Clamp—For Dominion / SRAM Matchmaker

Peacemaker Brake Lever Clamp—For Dominion / Shimano I-Spec II

Replacement Lever Blade for Dominion A2 & A4 Brake Kits. Bronze. SFL Option available.

Replacement master cylinder lever assembly for Hayes hydraulic disc brakes.

Brake Pads for your Dominion T2 and an upgrade option for Dominion A2. Semi-metallic T106: Friction material provides enhanced modulation and silent operation. Aluminum backing plate for reduced weight.

The best just got better. The limited-edition Hayes Dominion T2 packs the power, sensitivity, and reliability the Dominion family is known for into its lightest chassis yet. Featuring a Reynolds designed and in-house produced carbon-fiber lever, titanium hardware, composite reservoir cover, pads with aluminum backing plates, and precise weight-reducing machining, the T2 is 50g lighter per brake (254g) than the Dominion A2. Key Features: - Tooled Reach Adjustment - Tooled Pad Contact Adjust - Axial Lever Orientation - K2 Hose - Crosshair Caliper Alignment - Composite lever & reservoir cover, titanium hardware Specifications: - Weight: 204g - DOT 5.1 Fluid - Tooled Reach Adjustment - 2-Stroke Dual Port Bleed System - Sealed Cartridge Bearings Lever Pivot - 100cm Front Hose Length - 180cm Rear Hose Length

Replacement disc brake calipers for Hayes Dominion hydraulic brake systems.

Dominion replacement disc brake pads are used to maintain optimal performance with Hayes disc brakes.

Replacement hydraulic brake caliper assembly for Hayes Dyno Comp and Sport brakes.

Miscellaneous replacement small parts for Hayes hydraulic disc brake systems. - Includes piston and seal

Externally fitting service parts for Hayes hydraulic disc brake master cylinder

Hose fittings for Hayes hydraulic disc brakes