Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands

Stems

$69.99
Promax's DA-1 XC mountain bike stem is 3D cold-forged, then CNC-machined from 6061-T6 aluminum to create a lightweight and strong stem. The two-piece faceplate features their bar-gripping DWT (Dynalock Web Technology), which increases the bar/stem interface.
$54.99
The RaceFace Aeffect 35 stem brings the advantages of a 35mm bar to the XC/Trail crowd at a mid-level pricepoint while maintaining a refined Race Face look. - Forged and machined from 6061 aluminum - Interlocking 4 bolt bar clamp secures your bar and distributes loads away from bolts - Stack Height: 39mm - Weight: 155g (60mm)
$70.00
Mix and Match might work for clothing, but not your mountain bike cockpit. The new Descendant stem is 3D forged from 7075 alloy, then machined for weight reduction, and is the perfect match for your Descendant bars—not that you’re worried about that kind of thing. Built strong, to take on the world’s toughest trails, Descendant stems keep you pointed in the right direction. - Colors: Black - Material: Al-7075 - Lengths: 40mm, 50mm, 60mm - Bolts: Steel - CNC machined for weight reduction - Four bolt handlebar clamp - Two bolt steerer clamp
$81.00
It’s low-slung, stiff, aggressive and serves up support and control the way a direct mount stem should. The Descendant direct mount stem may have been designed to attack the race clock, but it was built tough, to take on whatever comes next. No matter where you take it, this Descendant stem will keep you pointed where you want to go. - Pair with BoXXer fork - Gives DH riders lower more aggressive position - Super-stiff, stable front-end handling - Lightweight - Two-piece design
$285.00
Zipp's SL Speed stem represents the essence of carbon componentry. It's stiff, secure and light weight with a sleek design that compliments any bike. It's a perfect addition to a mountain climber's favorite feather-light road bike, but it's tough enough to tackle gravel and cyclocross. Designed using SRAM Exogram technology, found in SRAM RED cranks, the new SL Speed Stem weighs just 123g (100mm) while exceeding our stiffness-to-weight standards. The SL Speed is available in six sizes ranging from 70 to 120mm to meet any rider's fit needs. Includes stiff aluminum faceplate and titanium hardware Torx T25 heads for precise torque readings and ease of adjustment. - Updated distinctive Zipp cosmetics - Designed using SRAM Exogram technology - New SL Speed Stem weighs just 123g (100mm) - ±6° carbon stem - Secure with four bolt faceplace using Torx T25 bolt heads - Matte Black finish - Lifetime warranty - Zipp Quickview integrated mount available separately
$96.00
TruVativ's feathery Stylo T40 Stem is 3D forged from 7050 aluminum for that perfect balance of light weight, stiffness and precision steering control on the trail. Six titanium bolts secure this stem to your fork and bars and keep the weight down, too. Plus, with four different lengths and two color options, you're sure to find the perfect stem with which to crown your ride.
$120.95
- CNC machined 2014 aluminum body and 7075 aluminum clamps - 240 degree wrap-around, twin plate clamping system - External webbing to maximize structural strength - 118-158g including stainless steel bolts
$85.00 - $95.00
Velo Orange Cigne Stem gets its name from the French word for swan. The shape is inspired by the old gooseneck LD stems by Ibis and Cunningham, but with a few accommodations for modern bike needs. 1 1/8" threadless and 31.8mm handlebar clamp with a removable faceplate. With 145mm of vertical height from the base of the stem to the center of the clamp, it's pretty useful for getting your handlebars up high without using a ton of spacers. - Star-nut should be approximately 1cm from the top of the steerer tube - Minimum 55mm of steer tube required - Not compatible with carbon steerer tubes - No top cap needed. Stem includes tension bolt
$64.99
XR1.5 stems are designed with a low stack height and negative rise for mountain bikers looking for a low handlebar position. The optimized aluminum construction achieves the perfect balance of strength, stiffness, and weight. 3D forged from 7075 alloy and a broad four-bolt faceplate design creates a better distribution of stress and lowers the clamping force required to secure the handlebar. This -17° stem was designed for the extreme riding position of some of our elite Cross Country World Cup stars.
$49.99
RR1.5 stems are designed with a low stack height and negative rise for road bikers looking to lower their handlebar position. They are made of high-grade aluminum to achieve the perfect balance of strength, stiffness and low weight. The body is 3D forged from an advanced 7075 alloy and the broad four-bolt faceplate design better distributes stress and lowers the clamping force required to secure the handlebar. - Designed for road use, but also suitable for mountain use - Forged and machined AL2014 body - 4-bolt face plate helps distribute clamping load - Corrosion-resistant Torx T25 steel bolts - Compatible with all 31.8 bars - 1 1/8" steerer - Includes stem top cap and bolt
$59.99
FL1.5 stems are designed with a low stack height and negative rise for mountain bikers looking for a low handlebar position. The optimized aluminum construction achieves the perfect balance of strength, stiffness, and weight. 3D forged from 7075 alloy and a broad four-bolt faceplate design creates a better distribution of stress and lowers the clamping force required to secure the handlebar. - Designed for mountain use - Forged and machined AL2014 body - 4-bolt face plate helps distribute clamping load - Corrosion-resistant Torx T25 steel bolts - Compatible with all 31.8 bars - 1 1/8" steerer - Includes stem top cap and bolt - Lengths: 50-90mm - Angle: 6° flip-flop
$499.99
The next evolution of our Integrated Cockpit concept, the Hixon iC is a truly revolutionary product. Thanks to a unique new construction method and high-quality carbon we have created a bar-stem combo designed for trail riding that weighs a scant 290g. - State-of-the-art carbon bar - ideal for All Mountain riding. - Syncros Engineered Carbon Construction - Additional sanding on grip/lever area help to reduce clamping forces - Integrated stem - 15mm mini rise shape - 9° back sweep, 6° upsweep - Width: 780mm
$549.99
RR1.0 Aero are crafted from high modulus carbon fiber to ensure precise steering in a lightweight, race-worthy design. The all-in-one combo offers clean lines from the drop to the steerer clamping area. The optimized carbon layup eliminates harsh road vibrations and reduces stress hotspots. The ergonomic bend provides you comfortable hand positions to mitigate fatigue, keeping you both confident and in control. - Designed to be perfectly integrated with the new Scott Foil bike - Aero top section with compact drop and reach - Full cable and wire integration - Integrated accessory mounting threads - Stem Angle: 84 degree - Material: Carbon monocoque with forged alloy steerer
$499.99
We took our hugely popular Hixon iC SL carbon fiber handlebar and stem combo and extended the rise from 12mm to 20mm and the width to 800mm for more aggressive trail and enduro riders. - State-of-the-art carbon bar ideal for All Mountain riding. - Syncros Engineered Carbon Construction - Additional sanding on grip/lever area help to reduce clamping forces - Integrated stem - Up Sweep: 6° up - Back Sweep: 7° back - 20mm mid rise - Clamp Diameter: iC (integrated Cockpit) - Steerer Diameter: 1-1/8" - Weight: 270g (780mm width, 50mm virtual extension) - Width: 800mm
$49.99
The XM1.5 is designed for aggressive technical riders for use with an oversize 35mm bar for the strongest setup. - Designed for aggressive technical trail riding - Forged and machined AL2014 body - Wide 4-bolt face plate helps distribute clamping load - Corrosion-resistant Torx T25 steel bolts - Compatible with all 31.8mm bars - Steerer Diameter: 1 1/8" - Lengths: 40-50mm - Angle: 2°
$599.99
The Syncros Creston iC is the ultimate in terms of integration on the road. Clean and uncluttered our new Syncros combo cockpit allows us to route all the cables completely internally through the bar, headset and into the frame as part of SCOTT’s new ICC routing. - Carbon UD, Superlight Layup - Compact Bend 75mm/125mm Reach/Drop - Clamp Diameter: iC (integrated Cockpit) - Steerer Diameter: 1-1/4" for Scott Addict RC MY20 - Weight: 280g
$599.99
Designed for gravel, the Syncros Creston iC SL X is the ultimate in integration with a flare designed to give maximum options offroad. Clean and uncluttered, our Syncros combo cockpit allows us to route all the cables completely internally through the bar, through the headset, and into the frame. - Developed for the SCOTT Addict Gravel - Integrated cables for both mechanical and electronic groupsets - iC integrated cockpit - Gravel-specific geometry with super-compact drops and short reach - 60mm/115mm/16° (Reach/Drop/Flare) - Full carbon construction, Superlight layup - Weight: 315g
$44.99
XR2.0 stems are designed with a low stack height and negative rise for mountain bikers looking for a low handlebar position. The optimized aluminum construction achieves the perfect balance of strength, stiffness, and weight. 3D forged from 7075 alloy and a broad four-bolt faceplate design creates a better distribution of stress and lowers the clamping force required to secure the handlebar. - Designed for mountain use - Forged and machined AL6061 body - 4-bolt face plate helps distribute clamping load - Corrosion-resistant Torx T25 steel bolts - Compatible with all 31.8 bars - 1 1/8" steerer - Includes stem top cap and bolt - Lengths: 50-90mm - Angle: -8°
$89.99
The Syncros DH1.5 direct-mount stem is made to do anything from blasting berms in the park to sending the gnarliest World Cup Downhill track. The stem is 3D-forged of high-grade 6061 alloy for ultimate strength and the 35.0mm clamp provides a rock-solid hold on your handlebar. - Material: Alloy AL7075 - Weight: 135 grams
$39.99
RR2.0 stems are designed with a low stack height and negative rise for road bikers looking to lower their handlebar position. They are made of high-grade aluminum to achieve the perfect balance of strength, stiffness and low weight. The body is 3D forged from an advanced 7075 alloy and the broad four-bolt faceplate design better distributes stress and lowers the clamping force required to secure the handlebar. - Designed for road use, but also suitable for mountain use - Forged and machined AL6061 body - 4-bolt face plate helps distribute clamping load - Corrosion-resistant Torx T25 steel bolts - Compatible with all 31.8 bars - 1 1/8" steerer - Includes stem top cap and bolt
$159.99
Your stem may seem inconsequential, but it is the point of transfer between your skilled handling and the bike itself. An impressive refinement of our popular top level Easton alloy stem, the 2019 EA90 stems have an larger boom diameter for increased stiffness and, by utilizing our highest quality alloys, we were able to remove excess material for even more weight savings. We’ve also created a custom computer mount (included with EA90 stems and sold separately) that is compatible with all ICM faceplate stems for cleaner lines and improved aerodynamics. With lengths ranging from 70mm to 130mm, we can accommodate fits for all sizes of frames and riders. We shaved our new EA90 down to 120 grams for a 100mm stem and, with weights like these, we surpass much of the alloy and carbon competition in the market, while giving you the durability, confidence and control you expect from Easton. - Finish: Black Ano - Weight: 120g (100mm) - Rise: +/- 7-deg - Clamp diameter: 31.8mm - Steerer: 1 1/8-inch - Length: 70mm, 80mm, 90mm, 100mm, 120mm - Materials: EA90 alloy - Tech: ICM compatible (faceplate mount included), Top Lock, Taperwall
$189.99
An adjustable stiffness suspension stem that smooths out the ride by reducing the affects of impacts and road vibrations. - Unwanted vertical movement is absorbed by twin interchangeable elastomers - Stem retains torsional rigidity - Travel is limited to 1-2 centimeters - Made with 6061-T6 Aluminum - Includes 5 swappable elastomers (2 pre-installed, 3 additional) to customize the ride feel for your bike, weight, and riding style
$299.99
Engineered exclusively for OverDrive Aero steerer tubes, the Contact SLR AeroLight is an ultralight and stiff composite stem that offers aero-enhancing integration, easy-to-adjust cable management, and sleek looks. FEATURES: - Works with OverDrive Aero steerer tubes only - Integrated aero design unifies the top cap, cables, and spacers with the head tube for improved aerodynamics - Ultra-light composite design delivers maximum stiffness at a superlight weight - Intuitive design guides all cables under and inside for optimized aerodynamics and sleek looks. - Fits current generation Contact Aero or Contact D-Fuse handlebars - Available in eight lengths from 80mm to 140mm SPECIFICATIONS - Weight: 123g (100mm) - Length: 70/80/90/100/110/120/130/140mm - Angle: -10° - Bar Clamp Diameter: 31.8mm - Steerer Tube Clamp Diameter: D-shaped OverDrive Aero, 1 1/4 inch - Stack Height: 44mm
$109.99
Race Face took their super popular Turbine 35mm stem and turned the volume up to R. Increased strength to handle the harshest aggressive all mountain riding combined with an update to 0-degree size for optimized fit and performance. This stem sets the new standard in weight vs strength. - CNC Aluminum - 0-degree rise for perfect fit on aggressive bike frames - Extensive CNC machining for weight reduction without impacting strength - TopLock faceplate design for easy and secure installation
$69.99
Whether you're on the open roads or scenic mountain trails or anywhere else you ride, Easton's EA70 Stem enhances your cycling experience. It's made of 3D forged aluminum for amazing stiffness, low weight and strength for excellent steering control in all conditions. Plus, Easton's TopLock technology locks the stem and faceplate together, creating a highly rigid interface while minimizing loads on the bolts, making the EA70 perfectly safe for carbon bars.
$320.00
ULTIMATE PERFORMANCE Featuring purpose-engineered shaping, Giant’s all-new Contact SLR Stem is stiff, strong and ultra-light. Available in ±10° and ±20° angles and eight lengths from 70 to 140mm, the Contact SLR stem accommodates a wide range of riders and is the perfect complement to the TCR or any other high-performance road bike. STIFF AND LIGHT With purpose- engineered shaping, full-carbon Contact SLR stem offers maximum stiffness at minimum weight. Compared with the previous Contact SLR stem, the all-new Contact SLR road stem is 9% stiffer and 7% lighter. AERO INTEGRATION The integrated stem cap of the all-new Contact SLR stem ensures a smooth flow of air over the top of the stem while the specifically designed shape of the spacers offers seamless integration and air transition over the side of the stem. VERSATILE FIT Perfect for any elite rider, the Contact SLR road race stem is available in eight sizes, ranging from 70mm to 140mm, and 2 angles (±10°/ ±20°).
$29.99 - $39.00
Dimension 31.8 Stems are fully forged 6061-T6 aluminum stems that have a 4-bolt handlebar clamp. - 31.8mm can be used with 26.0 bars with additional shim (SM5317) - Dimension stems are not intended for use with carbon handlebars or carbon steer tubes - Weight: 130g-180g
$40.00
Save your steerer tube and eliminate headset spacers with the Velo Orange Tall-Stack alloy stem. It gives your bike's cockpit a nice clean look. Available in Polished or Black, the 17-degree angle allows the stem to be level on most modern frames. And, you can use handlebar clamp shims to adapt to smaller handlebar clamp diameters, if you like. - Stack height: 75mm - Not recommended for use with carbon steerer tubes
$44.99
With its classic blend of high strength and low weight, Easton's EA50 stem is a smart choice for your favorite ride. It's made of 3D forged aluminum for amazing stiffness and strength. Easton's Top-Lock technology locks the stem and faceplate together, creating a highly rigid interface while minimizing the loads on the bolts, making the EA50 perfectly safe for carbon bars.
$29.99
Race Face's Ride stem is designed specifically for riders looking for Race Face engineering and quality at a value price point. - Forged and shot peened from 6061 aluminum for high strength and fatigue resistance at a reasonable weight - Four bolt bar clamp holds bar securely in position - Machined logo on bar clamp