Filter By:
- Show More Brands
- Show Fewer Brands
- Show More Sizes
- Show Fewer Sizes
Fenders

$49.99
Keep the road grime and water off your clothes with a durable fender set made specifically for the Roll. No-fuss installation means you can add them quickly and easily, so you're always ready to ride.
- Valuable and durable plastic fender set for Roll.
- Designed for 650b x 2.3" tires.
- Stainless steel fender stays and hardware.
- Rear fender supports Plug and Play frame mounting.
- Front: 660mm / Rear: 1050mm

$69.99
The ultimate set of mudguards for fat tire bikes offering all-round mud protection. Front is mounted easily under the down tube by high-performance straps and the rear fits to the seat post in seconds with the proven tool-free SKS quick-release Powerstrap attachment system. The two-hinge arm in the rear allows perfect adjustability to the geometry of your bike.

$24.99
SKS's S-Blade rear fender attaches easily to almost any road bike seatpost, protecting you from road spray and letting you ride through the wet.

$37.99
The Shockblade 26/27.5-inch is a clip on front, high-quality 2-component fender for mounting on the fork of 26-inch and 27.5-inch mountain and trekking bikes.
- Virtually unbreakable high quality dual compound plastic
- Hidden chuck cone adapter which is fitted once during first assembly
- Easy quick-release fastening
- Optimized dirt protection
- Fits almost all suspension forks
- 26-inch and 27.5-inch wheel compatible

$37.99
The Shockblade 27.5+/29-inch is a clip-on front, high-quality 2-component fender for mounting on the fork of 27.5+ and 29-inch mountain and trekking bikes.
- Virtually unbreakable high quality dual compound plastic
- Hidden chuck cone adapter which is fitted once during first assembly
- Easy quick-release fastening
- Optimized dirt protection
- Fits almost all suspension forks
- 27.5+ and 29-inch wheel compatible

$37.99
The X-Blade 27.5+/29-inch is a high-quality 2-component clip-on fender for the rear wheel of a 27.5+/29-inch mountain and trekking bikes. Due to the quick-release mounting, the fender can be fitted to almost any seat post and optimally adjusted to the wheel using the 2-joint technology.
- High performance dual compound plastic
- Easy quick-release-fastening by pre-adjusted powerstrap
- 2 joints for optimized adjustment to all frames
- Optimized dirt protection
- 27.5+ and 29-inch wheel compatible

$17.99 - $19.99
No matter the conditions, stay dry and clean with SKS's X-Tra Dry rear fender! It's super light and nearly unbreakable so you know it's ready for the miles, on road and off. Plus, it works with most bikes thanks to its easy-to-adjust seatpost mounting strap.

$74.99 - $119.99
- Rugged 6061 aluminum construction is corrosion resistant
- 100mm mudflaps provide ultimate coverage and are double-riveted for durability
- Hardware is all stainless-steel and pre-installed for hassle-free mounting
- V-stays for added stability
- Disc brake compatible
- 50mm width
- Release Tabs on front fender for added safety
- Meets EN test standards

$49.99 - $59.99
Turn your mountain bike into an all-weather vehicle with Planet Bike's Hardcore Fenders. Made of unbreakable Superflex polycarbonate with stainless-steel stays, they're ultra tough. They boast mudflaps for the ultimate in splash and spray protection and the front fender has release tabs for easy on/off. Plus, the hardware is pre-installed for quick mounting.

$59.99
Turn your bike into an all-weather vehicle with Planet Bike's Hardcore Fenders. Made of unbreakable Superflex polycarbonate with stainless-steel stays, they're ultra tough. They boast mudflaps for the ultimate in splash and spray protection and the front fender has release tabs for easy on/off. Plus, the hardware is pre-installed for quick mounting.

$39.99
Planet Bike's SpeedEZ Fenders keep you dry in wet weather and are easily removed when the sun comes out. Made from nearly indestructible Superflex polycarbonate and rustproof stainless-steel stays, these fenders also utilize a clever, pre-installed attachment system so you can mount and remove them in seconds.

$16.95
Tacky trails and damp roads, they're what dreams are made of. That doesn't mean we want our faces plastered with the muck that comes along with them. Using nothing more than a handful of zip ties, WTB's minimalistic mud guard attaches to your fork in less than a minute to keep your vision free of mud and focused on the turn ahead.

$15.95
This flat-printed, origami-inspired polypropylene fender is ultralight, stylish, and quickly attaches and is ready to go when wet weather arrives. Simply remove from the package, punch out the shape and fold along the perforated lines. Reflective printing adds safety at night while multi-mount positions and hook-and-loop straps allows fender to fit a wide range of bikes.
- Material: Polypropylene
- Added Features: 3M reflective printing
- Size: 35cm / 13.8" (in length)
- Weight: 68g / 2.40oz

$17.95
This flat-printed, origami-inspired polypropylene fender is ultralight, stylish, and quickly attaches and is ready to go when wet weather arrives. Simply remove from the package, punch out the shape and fold along the perforated lines. Reflective printing adds safety at night while multi-mount positions and hook-and-loop straps allows fender to fit a wide range of bikes.
- Material: Polypropylene
- Added Features: 3M reflective printing
- Size: 31cm / 12.2" (in length)
- Weight: 47g / 1.66oz (FS, on fork)

$14.95
This flat-printed, origami-inspired polypropylene fender is ultralight, stylish, and quickly attaches and is ready to go when wet weather arrives. Simply remove from the package, punch out the shape and fold along the perforated lines. Reflective printing adds safety at night while multi-mount positions and hook-and-loop straps allows fender to fit a wide range of bikes.
- Material: Polypropylene
- Added Features: 3M reflective printing
- Size: 31.7cm / 12.5" (in length)
- Weight: 42g / 1.48oz

$17.95
This flat-printed, origami-inspired polypropylene fender is ultralight, stylish, and quickly attaches and is ready to go when wet weather arrives. Simply remove from the package, punch out the shape and fold along the perforated lines. Reflective printing adds safety at night while multi-mount positions and hook-and-loop straps allows fender to fit a wide range of bikes.
- Material: Polypropylene
- Added Features: 3M reflective printing
- Size: 57.5cm / 22.6" (in length)
- Weight: 75g / 2.65

$15.95
Topeak's DeFender FX front fender offers durable rain and mud protection on wet and sloppy rides. It's incredibly light and easy-to-use, too. The FX installs easily to your fork and features quick-release attachments that allow it to be installed and removed in seconds.

$22.95
Specifically designed for 27.5” and 29” wheeled MTB’s. The DeFender front and rear fenders are the perfect choice for lightweight durable mud protection on those wet and sloppy rides. Quick release allows DeFenders to be installed and removed in seconds. A highly polished underside helps prevent dirt buildup and aids in cleaning. Fits 27.5” – 29” MTB tires up to 3” wide.
- QR fork attachment fits 19.6mm/26mm/27.7mm/35mm steerer tube
- Two tone injected high impact resistant plastic
- Weight: 233 grams
- Rear angle adjustable
- 73x21x11cm/28.7x8.3x4.3-inch

$39.95
Specifically designed for 27.5” and 29” wheeled MTB’s. The DeFender front and rear fenders are the perfect choice for lightweight durable mud protection on those wet and sloppy rides. Quick release allows DeFenders to be installed and removed in seconds. A highly polished underside helps prevent dirt buildup and aids in cleaning. Fits 27.5” – 29” MTB tires up to 3” wide.
- QR fork attachment fits 19.6mm/26mm/27.7mm/35mm steerer tube (FX); QR seatpost attachment (RX)
- Two tone injected high impact resistant plastic
- Weight: 233 grams (FX); 226 grams (RX)
- Rear angle adjustable
- Size: 73 x 21 x 11 / 28.7” x 8.3” 4.3” (Front); 61 x 18 x 10 / 24” x 7.1” x 3.9” (Rear)

$21.95
Topeak's DeFender M1 front fender offers durable rain and mud protection on wet and sloppy rides for your 26-inch bike. It's incredibly light and easy-to-use, too. The M1 installs easily to any standard fork, even reverse arch designs and seamlessly integrates with the front end of your bike. The quick-release attachments allow the DeFender to be installed and removed in seconds.

$24.95
Topeak's DeFender M1 front fender offers durable rain and mud protection on wet and sloppy rides for your 27.5- or 29-inch wheeled bike. It's incredibly light and easy-to-use, too. The M1 installs easily to any standard fork, even reverse arch designs and seamlessly integrates with the front end of your bike. The quick-release attachments allow the DeFender to be installed and removed in seconds.

$19.95
Topeak's DeFender RX rear fender offers durable rain and mud protection on wet and sloppy rides. It's incredibly light and easy-to-use, too. The quick-release seatpost attachment allows the DeFender to be installed and removed in seconds.

$22.95
Specifically designed for 27.5” and 29” wheeled MTB’s. The DeFender RX 279er fenders are the perfect choice for lightweight durable mud protection on those wet and sloppy rides. Quick release allows DeFenders to be installed and removed in seconds. A highly polished underside helps prevent dirt buildup and aids in cleaning. Fits 27.5” – 29” MTB tires up to 3” wide.
- Clamp Diameter: Universal, endless strap type
- Quick release allows DeFender to be installed and removed in seconds
- Rear angle adjustable
- Injected molded nylon
- Dimensions (L x W x H): 22 x 4 x 6"
- Weight: 226 grams

$62.95
The Topeak DeFender TX is a compact trekking bike fender set. Adjustable aluminum struts with QR levers for quick, perfect alignment and good tire coverage. The DeFender TX set is made of high impact plastic and the highly polished underside prevents dirt buildup. Fits tires up to 700 x 44c.
- Brake bolt and fork eyelets attachment (front) Seat tube and seatstay or chainstay eyelets attachment
- Injected high impact resistant plastic with aluminum struts
- Adjustable angle and position for perfect tire coverage
- 56.8 x 13.7 x 8.4 cm /22.4” x 5.4” x 3.3” (Front); 77. 8 x 26. 5 x 8.6 cm /30.6” x 10.4” x 3.4” (Rear)
- Weight: 192 grams (Front); 245 grams (Rear)

$54.95
Topeak's DeFender XC1 front fender offers durable rain and mud protection for your 26-inch wheeled bike. It's incredibly light and easy-to-use, too. Extra clearance makes it perfect for long-travel forks, and a unique design allow it to disengage if an obstruction enters the wheel. The quick-release fork attachment allows the DeFender to be installed and removed in seconds and the angle is adjustable for the perfect fit.

$37.95
Topeak's DeFender XC11 for 29ers is a rear fender that offers durable rain and mud protection on wet and sloppy rides. It's incredibly light and easy-to-use, too. The quick-release seatpost attachment allows the DeFender to be installed and removed in seconds and the angle is adjustable for the perfect fit.

$39.95
Stay clean and stay seen with Topeak's DeFender iGlow. It's a unique rear fender that has an integrated 0.5W light for safety at night or during low-visibility conditions. Strap this impact-resistant plastic fender down quickly and easily to the junction of your bike's seat and top tubes, and adjust it for perfect coverage. With constant and blinking modes, this light is ready when you are.

$6.95
Topeak's MTX DeFender is the perfect addition to your RX BeamRack. It clips seamlessly to the rack and provides valuable protection against moisture and trail grime.

$19.99
Our Coast Fender integrates perfectly with our Syncros 2019 saddles equipped with two threaded inserts. Simply attach, adjust with the two included screws, and ride.
- Designed for Syncros 2019 saddles equipped with threaded inserts
- Includes 2 mounting screws
- Flexible material enabling you to jump off the bike easily
- High-impact resistant composite
- Approximate Weight: 22g

$44.99
This fender kit is specifically designed for SCOTT Road Addict and Speedster Disc 2022 frames featuring integrated cabling. Simple to mount, the system utilizes the dedicated seat stay bridge on the rear with front mounting on the caliper bolt.
- MATERIAL: Polycarbonate / Nylon with glass fiber / Steel
Page 1 of 5
Next page